Humidity Controller GSE Hygrostat 10A

HUMIDITY CONTROLLER GSE HYGROSTAT 10A 

Ensure that the humidity in your grow box always remains at the desired level.

GSE Humidity Controller Humidifier Dehumidifier Hygrostat (10A) guarantees that the humidity level in your grow box is consistently maintained at the preset level.

Humidity always regulated in the grow room

This controller allows you to manage both the humidifier and the dehumidifier, activating or deactivating them to keep the humidity level always in line with the set point. The humidifier controller is essential for environments that require a stable humidity level.

The Humidity Controller GSE Hygrostat 10A device connects between a humidification unit (mister) or dehumidifier and a wall outlet. It has two control buttons to set the desired humidity level and the type of operation by choosing the hysteresis.

The controller is provided as a ready-to-use unit, complete with a waterproof housing, network sockets with hinged covers, and a low-voltage digital sensor, making it ideal for humid environments. The sensor comes with a 4-meter cable.

Dimensions and technical specifications:

• Housing: LxHxD = 130x80x70mm.
• Humidity controller: LxHxD = 160x100x90mm.
• Power requirements: (mains)
• Voltage: 230 V/50 Hz, 8 Amp (3 A inductive).
• Digital sensor: 5V, Measures temperatures from -55°C to +125°C (from -67°F to +257°F) Accuracy 0.5°C from -10°C to +85°C.
• Humidity accuracy: +/-3%RH, max tolerance @55%RH.
• Protection grade: IP54.

Setting range:

• Humidity: from 30% to 100%.
• Hysteresis: dehumidifier from -10% to -1% and humidifier from +1% to +10%.

Discover the entire GSE G SYSTEMS ENGINEERING line on our Online Store.